Meltolit 383 (27.31.4) MCW
Metal cored stainless steel wire suitable for welding steels of similar composition and for dissimilar welds between these steels and mild steels, low alloyed and other stainless steels. Fully aust...
Ladda ner produktblad
Product information
Routile flux cored wire suitable for welding Nb and Ti-stabilised stainless steels with alloy content between 16 – 21% Cr, 6 -13% Ni and up to 3% Mo like 316Ti, 316Cb or 318. It is also used for corrosion resistant weld overlays.
Related products
Meltolit 312-PW
Routile flux cored wire with high alloy content and high ferrite ratio which allow it to benefit from extreme tolerance to hot cracking and to dilution with a wide range of base materials. Preheat ...
Meltolit Lean Duplex 2101
Rutile flux cored stainless steel wire for welding wrought, forged or cast duplex stainless steels for service in the as-welded condition. Heterogeneous welding between duplex stainless steels and ...
Meltolit 310-PW
Rutile flux cored stainless steel wire for gas shielded arc welding with 25Cr and 20Ni deposit. Specifically designed for out-of-position welding, maximum productivity for completion of vertical w...
Meltolit 707 FCW-OA
Special flux cored self shielded austenitic stainless steel wire for open arc welding. The weld beads produced have a self-releasing slag covering that leaves a clean surface. Good quality welds m...