Meltolit 25.35
Fully austenitic stainless steel filler metal characterized by high resistance to carburizing atmospheres and high resistance to temperature-scaling up to 1150°C. Excellent weldability on both AC a...
Product information
Tig wire for welding stainless steels of similar composition or ferritic stainless steels.
Joining stainless steels to mild and low-alloyed steels. Rebuilding and buffering before cladding or hardfacing. Maintenance on « hard-to-weld steels ». Examples: Dissimilar welds between stainless steels type 304, 304L, 316, 316L, 318, 316Ti, 321, 410 or ferritic stainless steels type 1.4713, 1.4724, 1.4742, 3Cr12, to non or low alloyed CMn steels, for service temperatures up to 400°C.
Related products
Meltolit 21.33
Fully austenitic stainless steel filler metal characterized by high resistance to carburizing atmospheres and high resistance to temperature-scaling up to 1050°C. Excellent weldability on both AC a...
Meltolit 2567
For repairs of hot forming tools as well as for reinforcement of work surfaces. To be used for anneal cuts, forging dies, etc. Hardness: 41-46 HRC. W.N 1.2567
Meltolit Titanium grade 23 (Ti6Al-4VELI)
Titanium Grade 23 is similar to Grade 5 but has lower oxygen, nitrogen and iron levels. However it has higher fracture toughness and better ductility than grade 5. ...
Meltolit Co190
Cobalt alloyed tig wire especially developed for the oil and gas industry and the rotary drill bits. Extreme environments with heat and abrasion. Hardness 52-56 HRC