Meltolit 361 MCW (1.4361)
Metal cored stainless steel wire suitable for welding mathing silicon enhanced austenitic steels according to 1.4361. Excellent weld metal quality and X-ray soundness. Especially good corrossion r...
Product information
Routile flux cored wire suitable for welding stainless steels with an alloy content between 16 to 21% Cr and 8 to 13% Ni, stabilised or not. Service temperatures are typically -196°C to about 400°C.
Related products
Meltolit 383 (27.31.4) MCW
Metal cored stainless steel wire suitable for welding steels of similar composition and for dissimilar welds between these steels and mild steels, low alloyed and other stainless steels. Fully aust...
Meltolit 312-PW
Routile flux cored wire with high alloy content and high ferrite ratio which allow it to benefit from extreme tolerance to hot cracking and to dilution with a wide range of base materials. Preheat ...
Meltolit Lean Duplex 2101
Rutile flux cored stainless steel wire for welding wrought, forged or cast duplex stainless steels for service in the as-welded condition. Heterogeneous welding between duplex stainless steels and ...
Meltolit 310-PW
Rutile flux cored stainless steel wire for gas shielded arc welding with 25Cr and 20Ni deposit. Specifically designed for out-of-position welding, maximum productivity for completion of vertical w...