Meltolit 25.35
Fully austenitic stainless steel filler metal characterized by high resistance to carburizing atmospheres and high resistance to temperature-scaling up to 1150°C. Excellent weldability on both AC a...
Product information
For repairs of hot forming tools as well as for reinforcement of work surfaces. To be used for anneal cuts, forging dies, etc. Hardness: 41-46 HRC. W.N 1.2567
Related products
Meltolit 21.33
Fully austenitic stainless steel filler metal characterized by high resistance to carburizing atmospheres and high resistance to temperature-scaling up to 1050°C. Excellent weldability on both AC a...
Meltolit Titanium grade 23 (Ti6Al-4VELI)
Titanium Grade 23 is similar to Grade 5 but has lower oxygen, nitrogen and iron levels. However it has higher fracture toughness and better ductility than grade 5. ...
Meltolit Co190
Cobalt alloyed tig wire especially developed for the oil and gas industry and the rotary drill bits. Extreme environments with heat and abrasion. Hardness 52-56 HRC
Meltolit 250 XT
Cr-Mo alloyed steels (1,5% - 0,5%) resistant to high temperature, wear, pressure and shocks. Good resistance to cracking and to the attack of sulphured agents. Guide roller, excavators, scr...