Meltolit 21.33
Fully austenitic stainless steel filler metal characterized by high resistance to carburizing atmospheres and high resistance to temperature-scaling up to 1050°C. Excellent weldability on both AC a...
Product information
Fully austenitic stainless steel filler metal characterized by high resistance to carburizing atmospheres and high resistance to temperature-scaling up to 1150°C. Excellent weldability on both AC and DC+. This grade may be used for high temperature applications; welding of heat-resistant steels and cast steels of similar nature; joining and overlay welding of similar alloyed heat resistant steels and steel casts; joining and cladding of high heat resistant Cr-Ni steels of the same kind and cast steels in a low sulphureous environment.
W.N: *1.4853
EN ISO 14343-G/WZ 25 35 Zr
Related products
Meltolit 2567
For repairs of hot forming tools as well as for reinforcement of work surfaces. To be used for anneal cuts, forging dies, etc. Hardness: 41-46 HRC. W.N 1.2567
Meltolit Titanium grade 23 (Ti6Al-4VELI)
Titanium Grade 23 is similar to Grade 5 but has lower oxygen, nitrogen and iron levels. However it has higher fracture toughness and better ductility than grade 5. ...
Meltolit Co190
Cobalt alloyed tig wire especially developed for the oil and gas industry and the rotary drill bits. Extreme environments with heat and abrasion. Hardness 52-56 HRC
Meltolit 250 XT
Cr-Mo alloyed steels (1,5% - 0,5%) resistant to high temperature, wear, pressure and shocks. Good resistance to cracking and to the attack of sulphured agents. Guide roller, excavators, scr...