Meltolit 825 (NiCrMo3)
Nickel alloyed welding wire for welding Inconel 825 and alloys of similar composition and for cladding of carbon steels and low alloyed steels. Excellent corrosion resistant particularly in reducin...
Product information
For welding of corrosion resistant martensitic- ferritic rolled, forged and cast steels of similar composition such as 248 SV and 1.4418. Rebuilding and repairing casting defects, fabrication and rebuilding work on propellers, shafts and parts used in the water turbine and pump construction. The deposit is predominantly martensitic. It combines good toughness with excellent resistance to cavitation and to stress corrosion cracking.
Related products
Meltolit 25.35
Fully austenitic stainless steel filler metal characterized by high resistance to carburizing atmospheres and high resistance to temperature-scaling up to 1150°C. Excellent weldability on both AC a...
Meltolit 21.33
Fully austenitic stainless steel filler metal characterized by high resistance to carburizing atmospheres and high resistance to temperature-scaling up to 1050°C. Excellent weldability on both AC a...
Meltolit 2567
For repairs of hot forming tools as well as for reinforcement of work surfaces. To be used for anneal cuts, forging dies, etc. Hardness: 41-46 HRC. W.N 1.2567
Meltolit Titanium grade 23 (Ti6Al-4VELI)
Titanium Grade 23 is similar to Grade 5 but has lower oxygen, nitrogen and iron levels. However it has higher fracture toughness and better ductility than grade 5. ...