DURMAT FD 62

Product information

DURMAT FD 62

DURMAT FD 62 is a high C-Cr-alloyed flux core wire. The alloy is especially made for overlaying parts which are exposed to very extreme abrasive mineral wear related to the high amount of hard phases ike hypereutectic M7C3-carbides. For best results avoid to apply the hardfaced area to pounding or impact load. DURMAT FD 62 should be applied in 2 layers with a maximum height of 10 mm. Before verlaying a previously hardfaced surface a buffer layer of Meltolit 707 FCW or DURMAT FD 200 K is recommended.
Application: Wear plates, spiked rollers, cement and concrete pumps, dredging teeth, slag breakers,
coke oven slides and Ni-Hard IV.