Skip to the content

MAG Unalloyed & low alloyed

Below are our most common wires for un-alloyed and low-alloyed steel. Ask us for additional information.

Click on the product to see data sheet!

Italfil SG2

Copper coated solid wire suitable for single pass or multipass welding of non alloy steels. It can be used for boilers fabrication, industrial machinery costruction, car production.

Italfil SG3

Copper coated solid wire suitable for single pass or multipass welding od non alloy steels, for C-Mn steels and for fine grain steels. The higher Si-Mn content gives a good bead appearance. It can be used for boilers fabrication, industrial machinery costruction, car production

Italfil EVO WIRE 2

Solid uncoppered welding wire suitable for single pass or multipass welding on non alloy steels, for C-Mn steels and for fine grained steels. It can be used for boilers fabrication, industrial machinery construction, car production etc.

Italfil EVO WIRE 3

Solid uncoppered welding wire suitable for single pass or multipass welding on non alloy steels, for C-Mn steels and for fine grained steels. The higher Si-Mn content gives a good bead appearance. It can be used for boilers fabrication, industrial machinery construction, car production etc. Gives less fumes and spatter than coppered wires.

Italfil NEW WIRE 3

Uncoppered MAG-wire that minimizes spatter, silicon islands and fumes when welding. Exceptional welding wire that is very easy to weld and can sometimes replace flux cored wires. Works excellent in robotic applications.

cortensvetstråd

Italfil Cortén

For heat resistant steels. It grants good resistance to hydrogen and sulphured agents attack. Used for steam boilers, pressure tanks, pipelines, cranes, ground moving machines, presses, chemical and petrolchemical industry.

Italfil SGMo (Mo)

Structural steels resistant to heat and to hot work creep. Pipelines, steam boilers, pressure tanks, gas pipes, ship building sector, chemical, petrolchemical sector, equipment, building of cranes.

Italfil SGCrMo1 (CM)

For heat resistant steels. It grants good resistance to hydrogen and sulphured agents attack. Used for steam boilers, pressure tanks, pipelines, cranes, ground moving machines, presses, chemical and petrolchemical industry.

Italfil SGCrMo2 (C2M)

Cr-Mo alloyed steels, resistant to high temperatures, wear impact stress and corrosion. Boiler pipes, steam boilers, pressure tanks.

Italfil SG-100 (T1)

NiCrMo fine-grained steels for low temperature applications. Used in the industrial sectors of means of transport and ground movement, building industry, bridges, tanks, railway transport, mining industry, shipbuilding etc.

Italfil SG-110 (T1S)

Copper coated low-alloy wire with Ni-CrMo suitable for single pass or multipass welding of low-alloy steels. It can be used also when good toughness characteristics in low temperature are requide.

Italfil SG-T90

NiCrMo alloyed steel, fine-grained and yeld strength. Lifting and handling machines, building industry, transport, naval, railway sector, mining industry, petrolchemical industry, etc.

Italfil SG-T96

Fine-grained steel, high yeld strength, austempering steels. Lifting and handling machines, bridges, tanks, transport, shipbuilding, railway sector, mines, cranes, frames, etc.