Skip to the content

Soft solders - Fluxfilled

These are our most common flux cored solders. We have many more so please contact us for more information.

Meltolit P30 95/5 VA

Silver alloyed tin solder for copper, brass, steel and stainless steel. Mainly used in HVAC and cooling installations. Meltolit P30 95/5 is for soldering in capillary, pipes and sheet metal parts. Works perfectly with small gaps and is very fluant. The color is a good match to stainless steel. Contains "VA" flux core which is very reactive. Flux residues needs to be cleaned after soldering. Lead free. Melting range 221-230°C.

Meltolit P30 95/5 KD

Silver alloyed tin solder for copper, brass, steel and stainless steel. Mainly used in HVAC and cooling installations. Meltolit P30 95/5 is for soldering in capillary, pipes and sheet metal parts. Works perfectly with small gaps and is very fluant. The color is a good match to stainless steel. Contains "KD" flux core which is for allround soldering. Flux residues needs to be cleaned after soldering. Lead free. Melting range 221-230°C.

Meltolit 95,5 EL

Silver and copper alloyed tin solder mainly used for electronic applications but can be used in a wide range. Contains "EL" flux core(3,5% for electrical Applications). Flux residues does not need to be cleaned after soldering. Lead free eutectic solder with melting temp. 217°C. Halogen free IPC: ROL0

Meltolit 95,5 RA

Silver and copper alloyed tin solder mainly used for electronic applications but can be used in a wide range. Contains "RA" flux core(2,5% for allround Applications). The flux is a bit more reactive than EL but residues does not need to be cleaned after soldering. Lead free eutectic solder with melting temp. 217°C. IPC: ROM1

Meltolit 95,5 SP

Silver and copper alloyed tin solder mainly used for electronic applications but can be used in a wide range. Contains "SP" flux core(2,5% for allround Applications). The flux is very reactive and residues needs to be cleaned after soldering. Lead free eutectic solder with melting temp. 217°C. Halogenfree. IPC: ORH0

Meltolit 9730 RA

Copper alloyed tin solder for soldering of copper pipes in drinking water and heating installations. Contains flux core "RA" for allround soldering. Temperature range: 230-250°C.

40/60 HS10 Stannol

The soldering wire HS10 can be used for manual and machine soldering in the area of electrical engineering and electronics. Melting range: 183-238°C.

  • Halogen-activated natural resin (colophony)
  • Rapid dispersion
  • Solid, non-adhesive residues which can remain at the soldering point.
  • No-Clean

40/60 S321 Stannol

The S321 soldering wire can be used for manual and robot soldering and flame brazing. The low flux residues should be removed after the soldering process. Melting range: 183-238°C.

  • Very high activation
  • Suitable for most metal surfaces
  • Residues must be removed
  • Residues are easily soluble in water
  • Not for stainless steel and aluminium

62/32 HF32 Stannol

HF32 can be used for manual and machine soldering in the area of electrical engineering and electronics. Melting range: 183-190°C. 

  • Halogen-free activation
  • Reduced resin amount
  • High proportion of organic acids
  • Less fumes

60/40 HS10 Stannol

The soldering wire HS10 can be used for manual and machine soldering in the area of electrical engineering and electronics. Melting range: 183-190°C.

  • Halogen-activated natural resin (colophony)
  • Rapid dispersion
  • Solid, non-adhesive residues which can remain at the soldering point.
  • No-Clean