Metal pastes - Other alloys

For brazing of aluminium containing more than 7% Si. Excellent for both manual and mechanical brazing. Can be ordered with or without flux.

Packaging: 1,0kg

Zn-alloyed aluminium pasta for brazing of aluminium alloys in low temperature due to the special allor Zn-Al. Meltolit 440 MP has excellent Properties for capillary pipas and parts in aluminium. It is also very good for temperature sensitive components.

Packaging: 0,25kg

Nickel based metal pastes with over 1000 degrees working temperature. These pastes are mainly used for stainless steel joints in either vacuum or protective gas ovens.

The joint becomes stronger than the base metal itself. 

These pastes are only containing binder and no flux.

300 = B-Ni2

301 = B-Ni3

302 = B-Ni5

303 = B-Ni6

304 = B-Ni7

The pastes can be ordered in syringes or 1kg jars

Ask us for more information

Nickelbaserade metallpastor med lägre arbetstemperaturer som dessutom är eutektiska (inget smältintervall). Användningsområde se ovan. Doseringsutrustning samt vakumlödning är att föredra.

Copper paste for vacuum brazing in high temperatures. Used for carbon steel or chromium steel joints.

Copper paste for vacuum brazing in high temperatures. Used for carbon steel or chromium steel joints.

Copper alloy paste with 5% silver and 6% phosphor primarily used for brazing of copper pipes and HVAC connections. Meltolit 205 MP can be used for brazing in copper, brass and in some extent steel. Its composition provides high ductility, excellent fluidity, low melting point and excellent resistance to vibration.

Copper alloy paste with 15% silver and 6% phosphor primarily used for brazing of copper pipes and HVAC connections. Meltolit 215 MP can be used for brazing in copper, brass and in some extent steel. Its composition provides high ductility, excellent fluidity, low melting point and excellent resistance to vibration.