Skip to the content

Copper/Brass

 Brass is used for brazing of unalloyed and low alloyed steel where the working temperature and/or the deformation risks are to high when using welding. We have different alloys where fluidity, mechanical properties and color match are some of the factors separating them.

Click on the product to see data sheet!

*Exists with flux coating.

Meltolit 900*

Copper and Zinc-based brazing alloy for joining steel, steel castings and some copper alloys. The deposit will be of brass colour and structure.

Meltolit 850

Copper and Zinc-based brazing alloy with nickel for higher fluidity and a bit higher mechanical strenght than our Meltolit 900. For joining steel, steel castings and some copper alloys. The deposit will be of brass colour and structure.

Meltolit NS95*

Nickel-alloyed Zinc-based brazing alloy with high mechanical strenght and good fluidity. For joining steel, steel castings and some copper alloys. This alloy can with success be used to fill cracks in cast-iron and hardfacing machine parts.​​

Meltolit ES942*

Copper and Zink-based bazing alloy with 1% Silver with very good fluidity. Used for brazing of steel, galvanized steel, copper and copper alloys.

Meltolit ES945*

Copper and Zink-based bazing alloy with 1% Silver and 10% Nickel with extra godd mechanical strenght and good fluidity. Used for brazing of steel, galvanized steel, copper and copper alloys. This alloy is used in large extent with gliding rolls, bearings etc that are exposed to wear.